© 2018 Guangzhou Libao Auto Parts Co., Ltd. ICP备18025545号
ABOUT LIBAO PRODUCTS NEWS COOPERATION SERVICE CONTACTC
LIBAO AUTO PARTS
Stainless steel parts
Method one: Clean the surface of stainless steel with water, then dry it, pour a little gypsum powder on the dry towel, then wipe the surface of the object, or directly pour the gypsum powder on the surface of the object, and wipe it with a dry towel, so as to achieve a bright and new effect. .
Method two: Use a towel to dip a suitable amount of industrial alcohol and wipe the stainless steel surface to achieve a cleaning effect.
Method 3: Use a towel or sponge on the car's cleaning wax (such as 99 wax) to evenly wipe the surface of the object to remove surface smears and repair the small scratches on the surface of the object.
Method 4: Apply the toothpaste on the surface of the product, wipe it with a towel, and finally rinse with water. The surface of the product will become bright.
Method 5: The above are some simple cleaning methods. More specifically, different parts of the stainless steel guard bar need to be cleaned with different liquids. The specifics are as follows: The surface of stainless steel is dusty and easy to remove dirt. Available soap, weak Wash with detergent or warm water. The trademark and film on the surface of stainless steel are washed with warm water and weak detergent, and the adhesive component is scrubbed with alcohol or organic solvents (ether, benzene). Contaminated with grease, oil, and lubricating oil on the surface of stainless steel. After wiping it off with a soft cloth, clean it with a neutral detergent or ammonia solution or a special detergent. Stainless steel surface with bleach and various acid attachments, rinse immediately with water, then dip in ammonia solution or neutral carbonated soda solution, wash with neutral detergent or warm water. Stainless steel has a rainbow pattern on the surface, which is usually caused by excessive use of detergent or oil. It can be washed with warm water and neutral detergent. Rust on stainless steel surface can be washed with 10% nitric acid or grinding detergent, or it can be washed with special detergents.